Progress Report on Recent Developments on One Manufacturer's 1/4-in. ENG Recorder
A combined camera and ¼-in. VTR unit was modified to allow its 10 min of recording time to be increased to 21 min. This was accomplished by using thinner tape and a smaller hub in the ¼-in. cassette while increasing the amount of tape by about 50%, and increasing the recording density by about 40%. A signal-to-noise ratio of over 47 dB was achieved, with a bandwidth of 3.6 MHz (−3dB), by the development of a metal head and improved metal particle tape. Design criteria for maintaining tape motion stability are described.
- Print ISSN
- 0036-1682
- Published
- 1986-01
- Content type
- Original Research
- DOI
- 10.5594/J07868
Download the PDF
or become a SMPTE member today to access the
article.
Become a SMPTE
member today to access the article.